1.56-100ng/ml

<0.68ng/ml

Intra-Assay: CV<10% Inter-Assay: CV<12%

The microtiter plate provided in this kit has been pre-coated with an antibody specific to PRSS8. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to PRSS8. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain PRSS8, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of PRSS8 in the sample is then determined by comparing the O.D. of the sample to the standard curve.

*027690A: Microtiter Plate, 1x96 wells. Pre-coated; ready to use. *027690B: Standard, 2x1vial 027690C: Standard Diluent, 1x20ml *027690D: Detection Reagent A, 1x120ul *027690E: Detection Reagent B, 1x120ul 027690F: Assay Diluent A, 1x12ml 027690G: Assay Diluent B, 1x12ml 027690H: TMB Substrate, 1x9ml 027690K: Stop Solution, 1x6ml 027690L: Wash Buffer, 30X, 1x20ml

Store *027690A, *027690B, *027690D and *027690E at -20°C. Store all the other components at 4°C. Unused kit is stable for 6 months. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

1. Prepare all reagents, samples and standards. 2. Add 100ul standard or sample to each well. Incubate 1 hour at 37°C. 3. Aspirate and add 100ul Detection Reagent A. Incubate 1 hour at 37°C. 4. Aspirate and wash 3 times. 5. Add 100ul Detection Reagent B. Incubate 30 minutes at 37°C. 6. Aspirate and wash 5 times. 7. Add 90ul TMB Substrate. Incubate 10-20 minutes at 37°C. 8. Add 50ul Stop Solution. Read at 450nm immediately.