Technical Data
Edinburgh Minimal Media Low Glucose (Powder)
Molecular Biology Grade
Storage RT    Shipping RT
Components shown as g/liter
Ammonium Chloride5.00
Potassium Hydrogen Phthalate3.00
Sodium Phosphate Dibasic2.2
Salt Stock:
Calcium Chloride•2H2O0.0147
Magnesium Chloride•6H2O1.05
Potassium Chloride1.00
Sodium Sulfate0.04
Vitamin Stock:
Nicotinic Acid0.01
Pantothenic Acid0.001
Mineral Stock:
Boric Acid0.0005
Citric Acid0.001
Copper Sulfate •5H2O0.00004
Ferrous Chloride 0.0002
Manganese Sulfate0.0004
Potassium Iodide0.0001
Molybdic Acid0.00004
Zinc Sulfate•7H2O0.0004
The above formulation was derived from the following referenced formula:
Edinburgh Minimal Medium (EMM 2)
3g/LPotassium hydrogen phthalate (14.7mM)
2.2g/LSodium phosphate dibasic (15.5mM)
5g/LAmmonium chloride (93.5mM)
2% (w/v)Glucose(111mM)
20ml/LSalts (50X stock)
1ml/LVitamins (1000X stock)
0.1ml/LMinerals (10,000X stock)
50X Salts:
52.5g/LMagnesium chloride•6H2O (0.26M)
0.735g/LCalcium chloride•2H2O (4.99mM)
50g/LPotassium chloride (0.67M)
2g/LSodium sulfate (14.1mM)
1000X Vitamins:
1g/LPantothenic acid (4.20mM)
10g/LNicotinic acid (81.2mM)
10g/LInositol (55.5mM)
10mg/LBiotin (40.8uM)
10,000X Minerals:
5g/LBoric acid (80.9mM)
4g/LManganese sulfate (23.7mM)
4g/LZinc sulfate•7H2O (13.9mM)
2g/L Ferrous Chloride (7.40mM)
0.4g/LMolybdic acid (2.47mM)
1g/LPotassium iodide (6.02mM)
0.4g/LCupric sulfate.5H2O (1.60mM)
10g/LCitric acid (47.6mM)
Edinburgh Minimal Media is a thiamine-free formulation for nmt1 promoter studies for Schizosaccharomyces pombe transformations. The Low Glucose formulation is used for protoplasting and yeast transformations.

Directions per Liter: Dissolve 17.328g in 800-900ml of ddH2O, stirring gently until completely solubilized. Adjust pH of the medium to 0.1-0.3 pH unit below the desired level. Add additional water to bring the solution to 1L. Filter-sterilize using a 0.22 micron membrane filter. Aliquot into sterile containers. Do not autoclave. Contains heat-labile compounds that can be damaged with autoclaving.

Storage and Stability: Store powdered media at RT. Opened bottles should be capped tightly and kept in a dark, low humidity environment. Prepared media should be kept at 4°C and used within a short period of time.

Appearance: White to light tan, homogeneous, free flowing powder

Solubility: Colorless, clear, complete

pH: 6.0 ± 0.7

Important Note: This product as supplied is intended for research use only, not for use in human, therapeutic or diagnostic applications without the expressed written authorization of United States Biological.