31.2-2000pg/ml

12.6pg/ml

<10%

<12%

*024879A: Microtiter Strips, 1x96 wells, Pre-coated, ready to use *024879B: Standard, 2x1 vial 024879C: Standard Diluent, 1x20ml *024879D: Detection Reagent A (green), 1x120ul *024879E: Detection Reagent B (red), 1x120ul 024879F: Assay Diluent A, 1x12ml 024879G: Assay Diluent B, 1x12ml 024879H: TMB Substrate, 1x9ml 024879K: Stop Solution, 1x6ml 024879L: Wash Buffer, 30X, 1x20ml

The Stop Solution (024879K) included for use in this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Store *024879A, *024879B, *024879D and *024879E at -20°C. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

1. Prepare all reagents, samples and standards. 2. Add 100ul standard or sample to each well. Incubate 2 hours at 37°C. 3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C. 4. Aspirate and wash 3 times. 5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C. 6. Aspirate and wash 5 times. 7. Add 90ul Substrate Solution. Incubate 15-25 minutes at 37°C. 8. Add 50ul Stop Solution. Read at 450nm immediately.