14.81-1200ng/ml

5.66ng/ml

<10%

<12%

*366413A: Microtiter Strips, 1x96 wells, Pre-coated, ready to use *366413B: Standard, 2x1 vial 366413C: Standard Diluent, 1x20ml *366413D: Detection Reagent A (green), 1x1vial *366413E: Detection Reagent B (red), 1x120ul 366413F: Assay Diluent A, 1x12ml 366413G: Assay Diluent B, 1x12ml 366413H: TMB Substrate, 1x9ml *366413J: Positive Control, 1x1vial, xxng/ml (Lyophilized) 366413K: Stop Solution, 1x6ml 366413L: Wash Buffer, 30X, 1x20ml 366413M: Reagent Diluent, 1x300ul

The Stop Solution (366413K) suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Store *366413A, *366413B, *366413D, *366413E and *366413J at -20°C. After reconstitution of *366413J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

1. Prepare all reagents, samples and standards; 2. Add 50ul standard or sample to each well. 3. Add 50ul prepared Detection Reagent A immediately. Shake and mix. Incubate 1 hour at 37°C. 4. Aspirate and wash 3 times. 5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C. 6. Aspirate and wash 5 times. 7. Add 90ul Substrate Solution. Incubate 10-20 minutes at 37°C. 8. Add 50ul Stop Solution. Read at 450nm immediately.